Inhaltsverzeichnis
Werbung
12. Pivot the microprocessor retainer downward to close the retainer.
Figure 131. Closing the microprocessor retainer
13. Gently press down the small handle
down the small handle
and secure the new microprocessor in the socket.
Note: There are two marks on the microprocessor retainer. Ensure that you close the small handle
marked with
sequence when you close the small handles.
Figure 132. Securing the microprocessor in the socket
14. Reinstall the heat sink and fan assembly. See "Heat sink and fan assembly" on page 161.
15. If you are instructed to return the old microprocessor, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 189.
172
ThinkStation P510 and P710 Hardware Maintenance Manual
1
and then push the handle inward to secure it. Then gently press
2
and push the handle inward to lock the microprocessor retainer into position
first and then close the small handle marked with
. Always follow the correct
Werbung
Inhaltsverzeichnis
