Inhaltsverzeichnis
Werbung
Depending on your computer model, one of the following types of storage drive bracket is used in the
storage drive bay:
Figure 59. Two types of storage drive bracket
To install or replace a 3.5-inch storage drive in a type
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 99.
2. Locate the storage drive bay. See "Internal drives" on page 38.
3. Depending on whether you are installing or replacing a 3.5-inch storage drive, do one of the following:
• If you are installing a 3.5-inch storage drive, open the handles on both sides of the storage drive
bracket, and pull out the empty bracket.
• If you are replacing a 3.5-inch storage drive, open the handles on both sides of the storage drive
bracket. Disconnect the cables from the storage drive, and pull out the bracket with the storage drive.
Figure 60. Removing the type
128
ThinkStation P510 and P710 Hardware Maintenance Manual
1
bracket, do the following:
1
storage drive bracket
Werbung
Inhaltsverzeichnis
