Thermal Sensor - Lenovo ThinkStation P320 Hardwarebedienungsanleitung

5. Position the new internal speaker into the four metal clips
left until it is secured in place.
Figure 94. Installing the internal speaker
6. Connect the internal speaker cable to the internal speaker connector on the system board. See "Parts
on the system board" on page 34.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 166.

Thermal sensor

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace the thermal sensor, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 91.
2. Remove the front bezel. See "Front bezel" on page 92.
3. Locate the thermal sensor. See "Major FRUs and CRUs" on page 31.
4. Disconnect the thermal sensor cable from the thermal sensor connector on the system board. See
"Parts on the system board" on page 34.
1 and push the internal speaker toward the
.
Chapter 9 Hardware installation and replacement
137