E N
LEVEL TWO SETTINGS MENU
The level two settings menu is reserved to qualified
and authorised personnel.
1
Type in the correct password and then press
"Enter". The default password is 33333.
You can navigate between the following items in
the level two menu by using buttons 4 and 5.
Language choice
➤
Descaling
➤
H
O Hardness
➤
2
Delta Temp
➤
Change password
➤
Energy saving
➤
Start pumps
➤
Card check
➤
Counter
➤
LANGUAGE CHOICE
By confirming the "Language choice" item with
"Enter" you can change the menu and display lan-
guage.
In fact the lower level menu allows you to choose
the language you want by pressing buttons 4 and 5
and making a choice using the "Enter" button.
Italiano
➤
English
➤
Français
➤
Deutsch
➤
Espanõl
➤
Português
➤
Nederlands
➤
Press the "Esc" button one or more times to go back
to previous menu levels or to exit the menu.
DESCALING
The descaling cycle can be activated at any time,
including when the machine does not show it is
required. By confirming the "Descaling" item with
"Enter", the following message will run across the
display.
INSERT DESCALING PRODUCT
INTO THE TANK AND PRESS OK
22
SETTINGS MENU
DESCALING
No more beverages can be dispensed until the cy-
cle has been completed.
At this point follow the instructions.
1
Fill the tank with descaling product diluted in
water according to the quantities indicated in
the instructions.
2
Position as large a container as possible under
the nozzle.
3
Then push "Enter"; the pumps will be activated
and the descaling solution will run out through
the nozzle after executing its action inside the
machine's circuit. The display will show the mes-
sage:
CLEANING CYCLE
IN PROGRESS
• Do not drink or risk causing the descaling
solution to be drunk.
• Danger of scalding, the descaling solu-
tion is dispensed at high temperature.
4
The machine will dispense the correct volume of
solution.
It is however possible to momentarily interrupt
the cycle, by pressing "Enter", to allow the con-
tents of the container used to collect the solu-
tion to be emptied and disposed of.
To increase the efficacy of the descaling prod-
uct's action it is in any case advisable to stop
for pauses of approximately one minute, ap-
proximately every two minutes of continuous
dispensing, by interrupting the cycle by press-
ing the "Enter" button.
5
Reposition the empty container under the noz-
zle.
6
Push "Enter" to restart the cycle.
In case of interruption to the electrical supply dur-
ing the descaling cycle, upon being restarted again
the machine will automatically reposition itself in
the start position once more.
7
When the tank is emptied, the display will show
the message: