Beta EVO series Betriebsanleitung Seite 57

3
GB
FORK OIL FORK OIL FORK OIL
FORK OIL FORK OIL
Right shaft Right shaft
Right shaft Right shaft Right shaft
To replace the oil, proceed as follows:
1) Remove the front wheel
2) Remove the handlebar (see pag.69)
3) Loosen left shaft lock screws A A A A A and
take off the slider
Unscrew upper plug B B B B B
4)
5) Unscrew fixing lock nut and take off
the plug
6) Unscrew the fixing screw of the
cartridge positioned under the slider,
and extract the cartridge
7) Empty the fork leg and the cartridge,
draining all the oil inside
8) Reassemble the cartridge on the slider
tightening the fixing screw, then refill
oil (OJ01) in the cartridge up to the
level indicated in the figure (with fork
in the fully compressed position)
9) Reassemble the plug on the rod, tighten
the lock nut and, extending the fork
leg, screw the plug on the shaft
10) Reassemble the fork
Oil
level
Note: Note: Note: Note: Note:
For screw A: torque wrench setting
7,8 : 9,1 Nm.
56