Storage; Disposal; Packaging; Trouble-Shooting - Silvercrest SHTP 2100 A1 Bedienungsanleitung

BB*5$B+DDUWURFNQHUB%ERRN 6HLWH  'RQQHUVWDJ  -DQXDU    
3. Allow the attachment (11 or 1) to dry
completely before you use it again.

7. Storage

WARNING! Risk of material damage!
Do not wrap the cable around the device
(risk of cable damage!).
• You can use the hook loop 6 to safely
and practically hang up the device for
storage purposes.

8. Disposal

The symbol showing a
wheelie bin crossed through
indicates that the product re-
quires separate refuse collec-
tion in the European Union.
This applies to the product and all accesso-
ries marked with this symbol. Products iden-
tified with this symbol may not be discarded
with normal household waste, but must be
taken to a collection point for recycling elec-
tric and electronic appliances. Recycling
helps to reduce the consumption of raw ma-
terials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
38 GB

9. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock! Do not attempt to repair
the device yourself under any cir-
cumstances.
Fault Possible causes / Action
• Has the device been con-
nected to the power supply?
• Has the overheating protec-
tion switched off the device?
Set the on/off switch to 0
(off), pull the mains plug out
No
of the wall socket and allow
function
the device to cool down ad-
equately. Ensure that no
hair or foreign bodies are
blocking the air inlet before
switching the device back
on.
10. Technical
specifications
Model: SHTP 2100 A1
Mains voltage: 220 - 240 V ~
50/60 Hz
Protection class: II
Power rating: 1800 - 2100 W
Subject to technical modification.