Kitchen Bench Top - ECG MTD 205 SS Bedienungsanleitung

EN
INSTALLATION OF THE TURNING PLATE
Charging (underside)
Plate
Turntable axis
INSTALLATION
Remove all packaging material and take out all the accessories.
Check that the oven is not in any way damaged (dented or damaged door, etc). Do not install the oven
if it is in any way damaged.

Kitchen bench top

Body of the oven: Remove all protective foil from the surface of the oven.
Do not remove the light brown foil which is screwed into the inside of the oven. This foil pro-
tects the oven's magnetron.
INSTALLATION
1. Place the oven on an even surface, which guarantees a suffi cient amount of free space for the cor-
rect function of the ventilation openings.
The distance between the oven and the nearest wall must be at least 7.5 cm.
At least one side must be free.
a) Leave at least 30 cm of free space behind the oven.
b) Do not remove the legs of the oven.
c) Do not block the ventilation openings. The oven could be damaged.
d) Place the oven as far as possible from a radio or television.
The microwave oven can interfere with the signal of the television or radio signal.
Completed turntable rotat
30 cm
7,5 cm
Open
7,5 cm
1. Never place the glass plate with the bottom in
the upward direction. The glass plate must always
turn freely.
2. Never use the oven without the driving collar and
the glass plate.
3. All foods and containers with food must always
be placed on the glass plate.
4. If the glass plate cracks or the driving collar is da-
maged, contact the nearest authorised service.
44