Kitchen Counter Installation; Setting The Time; Cooking In The Microwave Oven - ECG MTD 231 S Bedienungsanleitung

KITCHEN COUNTER INSTALLATION

Remove all packaging material and take out all accessories.
Make sure the appliance is not damaged (dented or damaged door etc.). Do not install an appliance showing any signs of damage.
Appliance box: Remove all protective wrapping from the surface. Do not remove the light brown mica protective cover of the
magnetron.
Installation
1. Choose a fl at surface with enough space for ventilation.
The appliance must be placed at least 7.5 cm away from the
nearest wall.
At least one side must be open space.
1) Leave at east 30 cm of free space above the oven.
2) Do not remove oven legs.
3) Blocking air vents can result in damaging the appliance.
4) Place the oven as far away from the radio or television as possible.
Television and radio broadcasting signals may interfere with
microwave oven operation.
2 Plug the appliance into a standard socket. Make sure the voltage
and frequencies of the network comply with the information on the appliance label.
ATTENTION: Do not place the microwave oven above stove or hob, nor in the vicinity of another heat source. Placing the oven above or
by a heat source could damage the oven and result in losing the warranty.
USING THE MICROWAVE OVEN

1. Setting the time

After plugging the microwave oven in, "0:00" appears on the LED display and a sound is heard.
1) Press Clock/Timer and select the time function. The hours begin to fl ash.
2) Use " " to set the hours between 0-23.
3) Press Clock/Timer again, the minutes begin to fl ash.
4) Use " " to set the minutes between 0-59.
5) Press Clock/Timer again to complete the time setting process. The time will appear on the display with the " : " symbol fl ashing.
Note: 1) The oven will not function properly without the time begin set.
2) You can press the Stop/Clear button at any moment during the time setting and the oven will return to its previous state.

2. Cooking in the microwave oven

Press Microwave and turn "
Press Start/+30Sec./Confi rm to start the cooking process.
Example: If you wish to cook at 80 % power for 20 minutes, perform the following steps:
1) Press Microwave, "P100" will appear on the display.
2) Use " " to set the power to 80 % – turn until "P80" appears on the display.
3) Confi rm by pressing Start/+30Sec./Confi rm.
EN
4) Turn " " to set the cooking time (turn until "20:00" appears on the display.
5) Press Start/+30Sec./Confi rm to start the cooking time or press Stop/Clear to cancel the setting procedure.
Note: When setting the cooking time, the rotating dial step changes according to the cooking time set as follows:
52
" to select the desired power. Press Start/+30Sec./Confi rm and use "
30 cm
7.5 cm
Free space
7.5 cm
" to set the cooking time.