Troubleshooting; Possible Cause - Silvercrest SRH 5 A1 Bedienungsanleitung Und Sicherheitshinweise

Troubleshooting

If you cannot connect the radio to a compatible Bluetooth
proceed as follows:
Make sure that the Bluetooth
♦
device.
Make sure that the Bluetooth
♦
switched on.
♦ If you use several external playback devices, ensure that any previously
made connection is disconnected. There may be a previously paired play-
back device still within range.
♦ Make sure that the radio is no more than 10 metres from the external
playback device and that no obstacles or electronic devices are placed
between them.
The following table helps to identify and rectify further possible faults:
Fault
There is nothing on
1
the display .
No sound.
Interference with the
radio reception.
■ 22 │ GB │ IE │ NI

Possible cause

The mains adapter is not
correctly connected.
The mains socket is not
supplying any power.
The device is not switched
on.
The volume is set to mini-
mum.
In AUX mode, the external
playback device is not
turned on.
The external playback
device is muted in AUX
operation.
The audio cable is not
correctly connected to the
r
AUX IN connection
AUX mode.
Radio reception is too
weak.
®
function is activated on the playback
®
function is activated and the radio is
Remedy
Make sure that the mains adapter is
correctly connected with the mains
adapter connection
mains socket.
Check the house fuses.
Switch on the device by pressing the
2
button .
Increase the playback volume with
the VOLUME |
6
SCAN dial
.
Switch on the external playback
device.
Unmute the external playback device.
Make sure that theaudio cable is
correctly connected to the AUX IN
in
r
connection .
Pull out the telescopic aerial
pletely. Try to improve reception by
moving the telescopic aerial
moving the radio to another location.
®
playback device,
w
and with a
ENTER /
0
com-
0
or by
SRH 5 A1