Adjusting The Telescopic Handle; Handle Adjustment; Resharpening Of The Saw Chain; Working Safely - FLORABEST FHE 550 Bedienungs- Und Sicherheitshinweise

GB MT
switch on the pruning saw at on/off switch
10.
- The equipment will switch off again when
you release on/off switch 10.
- For safety reasons, a lockable continuous
operation setting is not possible.

Adjusting the Telescopic Handle

H
The telescopic handle can be infinitely ad-
justed using quick release 15. Push the lever
forward as shown in the illustration then push
and pull to adjust the handle length.
Pull back the lever and so fix the desired
working length of the telescopic handle.

Handle Adjustment

I
• Loosen pivotal centre 8 and and fixing the
adjustable handle 9 on position.
• Replace the pivotal centre 8 to fixation.
Resharpening of the saw
chain
Leave the resharpening of a saw chain to an
expert or proceed according to the instruc-
tions of your saw chain sharpener. Resharp-
ening a saw chain takes some practice. If in
doubt, replacing the saw chain is preferable.
52

Working Safely

Observe the specified working angle (see
illustration above), in order to guarantee safe
working.
Do not use the high pruning saw when stand
ing on a ladder or in an unsafe position.
Do not be tempted to make unconsidered
cuts. Doing so may endanger both yourself
and others.
Children must be supervised to ensure that
they do not play with the equipment.

Accessories Enclosed

J
24 Blade cover
12 Shoulder strap
60 ml Grizzly-Bio-Oil
25