Auriol HG02132A Bedienungs- Und Sicherheitshinweise Seite 14

sensor, the Radio signal symbol stops
10
flashing and the temperature is shown in the
LC display.
Note: If the temperature station does not
receive the signal from the outdoor sensor within
3 minutes, the temperature station automatically
starts with the reception of the radio time signal.
After successful reception of the outdoor sen-
sor signal or after 3 minutes, the temperature
station starts with the reception of the radio time
signal. This process can take up to 5 minutes
and is indicated in the LC display by the flash-
ing DCF symbol .
2
After successful reception of the DCF radio
signal, the DCF symbol is displayed
2
continuously in the LC display.
Note: Do not move the temperature station
while it is receiving the signal. Otherwise this
could interfere with reception. If synchronisation
is not possible when the temperature station
is being first set up, try changing the location
(e.g. place the temperature station near to a
window).
Reception may be considerably reduced by
obstructions (e.g. concrete walls) or sources
of interference (e.g. other electrical devices).
If the reception of the radio signal continues
to be interrupted, you can set the time and
date manually (see "Setting the language /
time zone / time / date manually").
14 GB