Inhaltsverzeichnis
Werbung
6
Safety Notes
6 Gloves should be worn during installation to
prevent crushing and cutting injuries.
6 The shower system may only be used for
bathing,hygienic and body cleaning purposes.
6 Children as well as adults with physical, mental
and/or sensoric impairments must not use this
shower system without proper supervision.
Persons under the influence of alcohol or drugs
are prohibited from using this shower system.
6 Do not allow the streams of the shower touch
sensitive body parts (such as your eyes). An
adequate distance must be kept between the
shower and you.
6 The arm of the shower head is intended only to
hold the shower head. Do not load it down with
other objects!
Installation Instructions
• Prior to installation, inspect the product for
transport damages. After it has been installed, no
transport or surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
• The premounted dirt collection screen must be
used to prevent dirt from entering through the
pipes. Dirt entering can affect the function and/
or lead to damage to the functional components
of the fitting. Hansgrohe will not be held liable for
any resulting damage.
• Where the contractor mounts the product, he
should ensure that the entire area of the wall to
which the mounting plate is to be fitted, is flat
(no projecting joints or tiles sticking out), that the
structure of the wall is suitable for the installation of
the product and has no weak points. The enclosed
screws and dowels are only suitable for concrete.
For another wall constructions the manufacturer's
indications of the dowel manufacturer have to be
taken into account.
4
English
Technical Data
Operating pressure:
Operating pressure in front of
the shower:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking
water!
Symbol description
Assembly see page 11
Do not use silicone containing acetic
acid!
Dimensions (see page 7)
Flow diagram (see page 9)
Cleaning (see page 14)
Spare parts (see page 18)
Test certificate (see page 20)
max. 0,6 MPa
0,02 - 0,15 MPa
max. 60°C
max. 70°C / 4 min
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
