Notes On Safety - Aventics ECD-BV series Betriebsanleitung

AVENTICS | ECD-BV | R412025988–BAL–001–AA | English
English
1 About this Documentation
These instructions contain important information for the
safe and appropriate assembly and commissioning of the
product.
O Read these instructions carefully, especially chapter 2
"Notes on Safety", before you start working with the
product.
Documentation validity
O This documentation is valid for ECD-BV series compact
ejectors.
Additional documentation
O Also follow the instructions for the other system
components.
O Please also observe the generally relevant, statutory
and other binding regulations of European and national
legislation and the national regulations for accident
prevention and environmental protection in your
country.
Presentation of information
Warnings
In this document, there are safety instructions before the
steps whenever there is a danger of personal injury or
damage to the equipment. The measures described to
avoid these hazards must be followed.
Structure of warnings
Hazard type and source
Consequences of non-observance
O Measures to avoid these hazards
Bedeutung der Signalwörter
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injuries.
Indicates that damage may be inflicted on the product or
the environment.
Symbols
Operation may be impaired if this information is
disregarded.
SIGNAL WORD
WARNING
CAUTION
NOTICE
2

Notes on Safety

The product has been manufactured according to the
accepted rules of current technology. Even so, there is a
risk of injury or damage if the following general safety
instructions and the specific warnings given in this
instruction manual are not observed
O Please read all these instructions carefully before
working with the product.
O Keep these instructions in a location where they are
accessible to all users at all times.
O Always include the operating instructions when you
pass the product on to third parties.
Intended use
The ejector is exclusively intended for installation in a
machine or system or for combination with other
components to form a machine or system.
O Use is permitted only under the operating conditions
and within the performance limits listed in the
technical data. Only use neutral gases in accordance
with EN 983 as media.
O Exclusively use the ejector for vacuum generation in
pneumatic systems.
Compact ejectors are intended for professional use only
and not for private use. Compact ejectors may only be
used for industrial applications (class A in accordance
with DIN EN 55011). An individual license must be
obtained from the authorities or an inspection center for
systems that are to be used in a residential area
(residential, business, and commercial areas).
Intended use includes having read and understood these
instructions, especially chapter 2 "Notes on Safety".
Improper use
O Do not use the ejector in explosive areas.
O Do not use the ejector to suction fluids, aggressive or
flammable gases, and bulk materials (e.g. granulate).
Personnel qualifications
Assembly, disassembly, commissioning, and maintenance
(incl. service and care) require basic mechanical and
pneumatic knowledge, as well as knowledge of the
appropriate technical terms.
In order to ensure operational safety, these tasks may only
be carried out by qualified personnel or an instructed
person under the direction of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures,
due to their professional training, knowledge, and
experience, as well as their understanding of the relevant
regulations pertaining to the work to be done. Qualified
personnel must observe the rules relevant to the subject
area.
The trained personnel must also be familiar with the
control concept of the system.
7