Table 2-3 Preboot Menu Options (3 Of 6) - HP LaserJet Enterprise 700 M712 series Handbuch Zur Fehlerbehebung

Table 2-3 Preboot menu options (3 of 6)
Menu option First level
3 Administrator 6 Manage
Disk
continued
continued
ENWW
Second level Third level
7 Internal
Device
1 Secure
Erase
2 Erase/
Unlock
3 Get Status
8 External
Device
1 Secure
Erase
2 Erase/
Unlock
3 Get Status
Description
Select the 7 Internal Device item to erase the internal
device or get status about the internal device.
Select the 1 Secure Erase item to erase all of the data on
the disk and unlock it if required.
This might take a long time.
NOTE: The system will be unusable until the system files
are reinstalled. ATA secure-erase command one pass over
write. Erases the entire disk, including firmware. The disk
remains an encrypted disk.
Select the 2 Erase/Unlock item to cryptographically erase
all data on disk and unlock the disk to allow access to it from
any product.
NOTE:
The system will be unusable until the system files
are reinstalled. Erases the HP HIgh Performance Secure Hard
Disk. The disk becomes a non-encrypted disk.
This item provides disk status information if any is available.
Select the 8 External Device item to erase the internal
device or get status about the internal device.
Select the 1 Secure Erase item to erase all of the data on
the disk and unlock it if required.
This might take a long time.
NOTE: The system will be unusable until the system files
are reinstalled.
The ATA secure-erase command erases the entire disk,
including firmware. The disk remains an encrypted disk.
Select the 2 Erase/Unlock item to cryptographically erase
all data on disk and unlock the disk to allow access to it from
any product.
NOTE:
The system will be unusable until the system files
are reinstalled. Erases the crypto key. The disk becomes a
non-encrypted disk.
This item provides disk status information if any is available.
Preboot menu options
93