Residual Risks - Parkside PKGA 20-Li B1 Originalbetriebsanleitung

IE NI CY
• Avoid overheating the
sanded object and the
sander itself. Possible fire
hazard.
• The workpiece gets hot
during grinding. Do not
touch the machined area,
allow it to cool down.
There is a risk of burning. Do
not use coolants or the like.
• Always empty the dust
container before work
breaks. Sanding dust in the
dust sack, micro filter, paper
sack (or in the filter sack or
extraction system filter) can
self-ignite under unfavourable
conditions such as flying sparks
caused by grinding metals.
Particular hazards are caused if
the sanding dust is mixed with
paint, polyurethane residues or
other chemical substances, or
if the sanded object is hot after
long working periods.

4) RESIDUAL RISKS

Even if properly operating and
handling this electric tool, some
residual risks will remain. Due to its
construction and build, this electric
tool may present the following haz-
ards:
a) Lung damage, if suitable res-
piratory protection is not worn;
14
b) Cuts
c) Ear damage if working without
ear protection.
d) Eye damage if suitable eye pro-
tection is not worn.
e) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk
of serious or lethal injuries,
we recommend that per-
sons with medical implants
consult their doctor and the
manufacturer of their medical
implant before operating the
machine.
Observe the safety in-
formation and notes on
charging and proper
use as shown in the op-
erating instructions for
your battery and charg-
er from the Parkside
X 20 V Team series.