Assembly - Husqvarna RA850 Bedienungsanweisung

• Around stones and trees.
• Near water.
To assemble the two-piece shaft
1. Turn the knob to loosen the coupling.
2. Align the tab of the cutting attachment (A) with the
arrow of the coupling (B).
B
3. Carefully push the shaft into the coupling until you
hear a click.
8

Assembly

4. Tighten the knob fully.
A
To disassemble the two-piece shaft
1. Turn the knob 3 turns or more to loosen the
2. Push and hold the button (C).
3. Hold tight in the end of the shaft that the engine is
CAUTION: Do not put the gear housing
in water.
coupling.
attached to.
1050 - 002 - 12.04.2019