Intended Use; Items Supplied; Safety Devices - Hilti SCO 6-A22 Bedienungsanleitung

Accessory tool
)
Collet
+
Clamping nut
§
Insulated gripping surface
/
Spindle lockbutton
:

3.2 Intended use

The product described is a hand-held cordless cut-out tool. It is designed for making cut-outs in drywall
board, gypsum fiber board, composite materials and wood or wood-like materials.
The product can be equipped with a removable connector for an optional vacuum cleaner / dust removal
hose. This connector is designed to fit standard vacuum cleaner hoses. Use of a suitable adapter may be
necessary in order to connect a vacuum cleaner hose to the product.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.

3.3 Items supplied

Cut-out tool, depth gauge, three collets (3.2 mm (1/8"), 4 mm (5/32"), 6.4 mm (1/4")), clamping nut, hex. key,
operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.group

3.4 Safety devices

This product has a motor protection system. It monitors current consumption and motor temperature and
prevents the product from overheating.
If the motor is overloaded through application of excessive working pressure, the product's performance
drops noticeably or it might stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the product
and then allow it to run under no load for approx. 30 seconds.
4 Consumables
The following accessory tools can be used with the cut-out tool:
Drywall
• Guidepoint bit (3.2 mm (1/8"))
• Standard bit (3.2 mm (1/8"))
• Universal guidepoint bit (4 mm (5/32"))
• Window/door guidepoint bit (6.4 mm (1/4"))
Metal
• Metal bit (4 mm (5/32"))
5 Technical data
5.1 Cut-out tool
Rated voltage
Rated speed under no load
Weight in accordance with EPTA procedure 01
Weight B 22/2.6
Weight B 22/3.0
Weight B 22/5.2
Operating temperature
Storage temperature
Clamping nut
Printed: 30.11.2017 | Doc-Nr: PUB / 5373445 / 000 / 01
Insulated gripping surface
∙
Air vents
$
Release button with additional function
£
(charge state display activation)
Battery
|
SCO 6-A22
21.6 V
30,000 /min
1.4 kg
0.48 kg
0.58 kg
0.78 kg
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
16 mm (5/8") external
hexagon
English 15