Operating Your Hand Blender; Assembling Hand Bender - KitchenAid 5KHB2571 Anleitung

OPERATING YOUR HAND BLENDER

Assembling Hand Blender
Before using the KitchenAid Hand Blender
for the first time, wipe the motor body and
attachment adapters with a clean, damp
cloth to remove any dirt or dust. Mild dish
soap may be used, but do not use abrasive
cleansers.
NOTE: Do not immerse the motor body
or the adapters in water.
Dry with a soft cloth. Wash all the
attachments and accessories by hand
or in the top rack of the dishwasher. Dry
thoroughly.
NOTE: Always be sure to unplug the
power cord from the wall socket before
installing or removing attachments.
Chopper Adapter
For information on attaching or removing
the Chopper adaptor, see "Using the
Chopper Attachment" section.
Bell Guard
Easily snaps onto Bell Blade and provides
protection to blades while the Hand Blender
is not in use.
NOTE: Ensure Bell Guard is installed with
the mounting clips positioned between
the ports on the Bell Blades.
10
W10506678A_01_EN.indd 10
Whisk Adapter
Pan Guard
The Pan Guard snaps onto any of the
included Bell Blades and provides protection
to the Hand Blender and your cookware.
Port
Blending Arm
Attachment
NOTE: Ensure Pan Guard is installed with
the mounting clips positioned between
the ports on the Bell Blades.
Port
7/11/12 1:45 PM