Resetting The Peak Values; Programming Enable; Altering The Operating Programming Enable - HYDAC ELECTRONIC ENS 3000 Handbuch

7.

Resetting the peak values

The ENS 3000 has an option for resetting the peak values of fluid level and
temperature (depending on the model). To reset a peak value, proceed as
follows:
E
Press both arrow keys
simultaneously and hold
them down for 3 s.
8.

Programming enable

The ENS 3000 has two types of programming enable, both of which must be set
to "enabled" before the settings may be altered. The operating programming
enable may be set or cancelled during operation. It provides protection against
unintentional alterations of settings.
Programming disable via the main programming enable means that no change
to the settings can be carried out during operation. This serves, for example, as
a safety function or as a protection against unauthorised alterations.
8.1

ALTERING THE OPERATING PROGRAMMING ENABLE

Press both arrow keys
simultaneously and hold
them down for about 6 s.
44
fluid level indication
display
(release
arrow keys)
Use the
fluid level indication
or keys to change the setting.
FrEE = programming enabled
Loc = programming disabled