Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher IKTS 35 Original Bedienungsanleitung

•
Now, at any time all changes can be made. The device will now function according
to the most recently entered information and settings.
•
Check to ensure that the bottoms of cookware do not slide around the surface of the
hobs, although scratched surfaces do not impact the device's functioning.
NOTE!
If you wish to turn off one hob while the device is in use, press and hold the
button of the desired hob until all settings return to „0" and the power and
temperature control lights flash. The selected hob will be in standby mode.
To turn off the entire device, press the ON/OFF button
•
After cooking or heating is finished, remove the plug from its socket and remove all
cookware from the hobs!

7. Cleaning and maintenance

7.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must
not use any kind of pressure water jet for cleaning the device!

7.2 Cleaning

o Clean the device regularly.
o For easier cleaning of the induction plate, remove it from its recess in the
serving trolley.
o Clean the hobs and their casing with a soft, moist cloth and mild, non-abrasive
cleaning agent.
o Remove all dirt and dust from the ventilation openings and clean if necessary
with a brush or air stream.
- 42 -
.