Set Up - Bartscher IKTS 35 Original Bedienungsanleitung

Installation of the auxiliary plate
4. When all trolley levels must be used
as shelves, install the delivered
auxiliary plate in the cutout. Pay
attention to the plate stability.

5.2 Set up

•
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•
Do not place the device near an open flame, electric oven or other source of heat.
•
Do not block or cover the ventilation ducts that allow for air to circulate around the
device. Doing so may lead to overheating of the device.
•
Keep a distance of at least 5 – 10 cm from flammable walls and other objects.
•
Do not place the induction plate near other equipment and objects sensitive to
magnetic fields (e.g. radio, television, etc.).
•
If you wish to use the induction plate separately as a table-top device, place it
on a flat, safe surface that can support its weight and is not heat-sensitive.
•
Never place the device on a flammable surface.
•
Ensure the device is located in such a manner that provides easy access to the plug
in order to quickly disconnect the device from its power source in case of need.
5. Put the kitchenware on the trolley
shelves.
6. Place the trolley in appropriate place
and block the castors with brakes.
- 35 -