Connecting the transmitter to an audio source
Turn off the audio source before connecting the transmitter. Place the
transmitter near the audio source. Do not place the transmitter in the imme-
diate vicinity of thick reinforced concrete walls and other radio-transmitting
devices, as the transmission range could be reduced.
You have several possibilities to connect "earis" to a sound source (e.g. TV,
stereo set etc.).
Check the options of connection of your audio source.
Connecting options:
DIGITAL AUDIO OUT
AUDIO OUT
L
)
)
)
)
Connecting the transmitter to digital-out
(S/PDIF / Toslink)
For best audio quality, connect the transmitter to your audio source using
the Toslink optical (digital) cable.
Please note that the digital input can only transmit audio sources in PCM /
Stereo standard.
Refer to the manual of the connected audio source to learn how to set up
the digital output.
32 English
Earis_BA_DE_EN_F_NL_E_I_underchin180920.indd 32
-S/PDIF digital output (Toslink)
- RCA sockets
R
- Headphone jack
- Loudspeaker
AV
- SCART socket
20.09.2018 14:27:11