Operating Elements And Connections - Omnitronic VHF-450 Bedienungsanleitung

4.3 Operating elements and connections

1 Reception antennas
Pick up the transmission signal of the hand-held
microphones.
2
Power on/off
Press this button to turn the receiver on and off.
a Volume indication AF
Indicates the volume of the audio signal received
(independent of the volume controls A and B); the more
segments are displayed, the higher is the volume level. In
case of overload, "OVER" lights up.
b
Transmission indication HF
Indicates the power of the radio signal received; the more
segments are displayed, the better is the reception.
3 Display
4 Volume controls
Controls for the audio signal of the respective channel at
the rear outputs.
c Indication of the transmission frequency
d
Indication of the transmission channel
e Reception indication of antenna A or B
16/21 00042241.DOC, Version 1.3