Operating Elements And Connections - Omnitronic WM-2402 Bedienungsanleitung

4. OPERATING ELEMENTS AND CONNECTIONS

1 Reception antennas
Pick up the transmission signal of the hand-held
microphones.
2 Power on/off with indicator
Press this button 2 seconds to switch the receiver
on or off. The button lights up as a power indication.
5 Button RESET
For service purposes only (resets the radio
connection for the 1st channel).
6 Signal output
Output of the mixed signal of both channels (6.3
mm jack, unbal.) for connection to a microphone or
line input of a mixer or amplifier.
3
Connection indication MIC 1 and MIC 2
Indicate an existing
corresponding microphone.
4 Level controls MIC 1 and MIC 2
Controls for the audio signal of the respective
channel at the rear output.
7 Button RESET
For service purposes only (resets the radio
connection for the 2st channel).
8 Power input
Plug in the connection cable of the supplied power
unit here.
13/16
connection to
00071114.DOC, Version 1.0
the