Technical Data - Husqvarna FS7000 D Bedienungsanweisung

Technical data

Engine *
Engine brand, type
Engine power, kW/hp@rpm
3
Displacement, dm /cu.in.
Cylinders
Air filter
Starter
Fuel
* = For further information and questions about this
specific engine, refer to the engine manual or the web
site of the engine manufacturer.
Fuel and lubrication system
Fuel tank capacity, l/gal
Oil tank capacity, l/qts
Engine oil
Gearbox oil
Gearbox oil tank capacity, l/qts
Grease
Hydraulic oil
Coolant fluid
1
As specified by engine manufacturer. The power rating of the engines indicated is the average gross power
output (at specified rpm.) of a typical production engine for the engine model measured to SAE J1995. Mass
production engines may differ from this value. Actual power output for the engine installed in the final machine
will depend on the operating speed, environmental conditions and other variables.
44
Technical data
1
40/10.6
8.5/9
SAE 15W40 or SAE 10W30, API Class CJ-4, ACEA E6-08, ACEA E9-08
SAE 75W90
1-Speed gearbox model: 0.95/1
3-Speed gearbox model: 1.77/1.87
Quality: NLGI 2. Standard: SAE J310
SAE 15W40, API Class SE, API Class CC, API Class CD
Ethylene glycol and water, 50/50 mixture. Supplied in the product at pur-
chase.
Propylene glycol and water, 50/50 mixture.
Deutz, TD 2.9 L4
55.4/74.3@2600
2.92/178
4
Radial seal with pre-cleaner and restriction indicator
Electric
Ultra-low-sulfur diesel fuel only
CAUTION: Do not make the mixture directly in the tank. It is
easier to get the correct 50/50 mixture if you make the mixture
in a container.
1223 - 002 - 09.07.2019