Storage - Silvercrest SRR 3.7 D5 Bedienungsanleitung

First, put the shaving head 3 into the cutting unit 2. The small
–
recesses on the edge of the shaving head 3 must lie over the
protrusions in the cutting unit 2 so that the shaving head 3
slides correctly into the cutting unit 2.
Place the blade in the middle of the shaving head 3.
–
Press the catches on the shaving head fi xture together a little
–
and replace it in the cutting unit 2. Ensure that the shaving
head fi xture is engaged when you release the catches.
5) Remove loose hairs from the shaver with the brush r.
6) Replace the cutting unit 2 on the shaver. Ensure that it snaps
into place and is seated fi rmly.
Clean the housing and the mains adapter e with a moist cloth.
■
NOTE
If...
... the shaving result is noticeably poorer, ...
–
... you have to the shave the same spot repeatedly to
–
achieve a good result, ...
... the shave takes much longer than usual, ...
–
... there is visible damage to the shaving heads 3, ...
–
... you must change the shaving heads 3.
Please contact Customer Services if you want to order shaving
heads 3.

Storage

Always replace the protective cap t onto the cutting unit 2
■
when you are not using the appliance.
■ Store the everything in a clean, dust-free and dry place.
│
■ 90 GB
SRR 3.7 D5