Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Fig. 6: Transporting the motor
(schematic diagram)
4
Intended use
Purpose
Fields of application
Contraindications
5
Product information
5.1
Type key
22
WARNING! Risk of injury due to the weight of the pump!
The pump itself and pump parts can be extremely heavy. Falling
parts pose a risk of cuts, crush injuries, bruises or impacts, which
may lead to death.
• Always use suitable lifting equipment and secure parts against fall-
ing.
• Never stand underneath a suspended load.
• Wear protective clothing for all work (safety shoes, helmet, pro-
tective gloves and protective goggles).
Glanded pumps in the IPH series are used specifically for pumping hot
water and hot liquids in the fields of application specified below.
They may be used for:
• Hot-water heating systems,
• District heating systems,
• Industrial circulation systems,
• Heat carrier circuits.
Typical installation locations are technical rooms within the building
with other domestic installations. Installing the device directly in
other used rooms (residential and work rooms) is not intended.
CAUTION! Risk of material damage!
Unpermitted substances in the fluid can destroy the pump. Abra-
sive solids (e.g. sand) increase pump wear.
Pumps without an Ex rating are not suitable for use in potentially
explosive areas.
• The intended use includes complying with these instructions.
• Any other use is considered to be outside the intended use.
The type key consists of the following elements:
For
IPH-O 65/125-2.2/2
example:
IP
Flange-end pump as In-line Pump
...H-O
Heat transfer media (heat transfer oil)
...H-W
Superheated water
65
Nominal diameter DN of the pipe connection
125
Nominal impeller diameter [mm]
2.2
Rated power P
2
Number of motor poles
[kW]
2
WILO SE 11/2017
Werbung
Kapitel
Inhaltsverzeichnis
