Inhaltsverzeichnis
Werbung
AIR COOLING KIT INSTALLATION
Two fan kits are available for air cooling the pump,
when natural air convenction is insufficient.
Specification for small fan (mod. 969-9310):
− air flow:
9 l/s (10 CFM)
− input voltage:
24 Vdc
− maximum power: 2.16 W
− dimensions:
60x60 mm (2.36x2.36 inches)
Specification for large fan (mod. 969-9313):
− air flow:
25 l/s (51 CFM)
− input voltage:
120 Vac, 50-60 Hz
− maximum power: 17 W
− dimensions:
119x119 mm
(4.69x4.69 inches)
Open the package containing the feet and respec-
tive screws and install them as indicated in the in-
stallation of the base fixing kit.
Position the fan on the pump, ensuring that the
holes in the plate line up with those in the feet.
Insert the respective washers and screws and
tighten with a screwdriver.
Connect the fan to the controller.
The low power fan can also be mounted under the
pump as shown in the figure.
32
TECHNICAL INFORMATION
SIDE MOUNTING
BOTTOM MOUNTING
87-900-851-01(A)
Werbung
Inhaltsverzeichnis
