Programming Scheme - Lupine Piko 4 Bedienungsanleitung

3

Programming scheme

Hint! After keeping the button down for aprox. 3 seconds, the light will enter the programming mode.
2-step 3-step
PRESS PRESS
Hold the button down Hold the button down
until the button until the button

flashed once flashed
then release then release
Low start "on" Low start "off"
PRESS PRESS
Hold the button down Hold the button down
until the button until the button

flashed once flashed
then release then release
36 Piko
4-step 3-step
PRESS PRESS
Hold the button down Hold the button down
until the button until the button


twice flashed 3 times flashed
then release then release
Battery High Battery Low
PRESS PRESS
Hold the button down Hold the button down
until the button until the button
 
twice flashed 3 times flashed
then release then release
3-step
(RVLR) (eco)
PRESS
Hold the button down
until the button

4 times flashed 5 times
then release
Alpine SOS
PRESS
Hold the button down
until the button

4 times flashed 5 times
then release
Example:
To get into 4-step
the button until the red LED
flashed 3 times, then release
the button.

SOS
PRESS
Hold the button down
until the button

flashed 6 times
then release
Default setting
3
mode, hold
Piko 37