General Declaration Of Conformity - Roto ZEL STG ZSU HS 10 II Bedienungsanleitung

Problem
Astro program is not
switching accurately.
The transmitter does
not carry out the set
switching commands.
The transmitter does
not carry out the set
switching commands
accurately.
Roller shutter does not
travel to end position.

General Declaration of Conformity

Becker-Antriebe GmbH declares that the device Centronic TimeControl
TC4410-II complies with the fundamental requirements and other relevant
guidelines of Directive R&TTE 1999/5/EC.
Intended for use in the following countries: EU, CH, NO, IS, LI
Subject to technical changes without notice.
Cause
Date is incorrect.
Incorrect city or incor-
rect degree of latitude/
longitude set.
Holiday function
switched on.
Astro shift is set.
The slide switch is set to
Manual mode.
Holiday function is
switched on.
End position not set.
Remedy
Set correct date.
Set correct city or exact
degree of latitude/lon-
gitude.
Switch off holiday func-
tion.
Adjust Astro shift.
Set the slide switch to
Automatic mode.
Switch off holiday func-
tion.
Set the end position in
the PROG END POSI-
TION SETTING menu.
57 - en