How To Disassemble The Appliance/Blade; How To Assemble The Device/Blade - Rommelsbacher MZ 400 Bedienungsanleitung

1.) How to disassemble the appliance/blades
Take off the motor
unit from the glass
bowl.
2.) How to assemble the appliance/blades
For assembly of
the special cutter,
place the shaft
of the cutter on a
worktop. Hold the
cutting unit with
your thumb.
16
CAUTION:
Pay attention that the mains plug is disconnected from the socket!
Remove the wor- Remove the special
king cover from the cutter.
glass bowl. In doing so, hold
the cutting unit at
the shaft and care-
fully lift it out of the
glass bowl.
CAUTION:
Pay attention that the mains plug is disconnected from the socket!
Put the second pair Carefully insert the
of blades on the special cutter. In
shaft in the right doing so, hold the
way round and turn blade at the shaft
it counter-clockwise and place it on the
up to the stop. blade holder inside
the glass bowl.
For disassembly of Turn the upper
the special cutter, pair of blades
place it on a work- clockwise up to the
top. Hold the blade stop. Then remove
with your thumb. the upper pair of
blades.
Place the working Then put the motor
cover on the glass unit on the working
cover. Mind the
bowl. Mind the
correct position of correct position of
the cover. the motor unit.
Note: Check both Note: The motor
sealings in the unit can be put
working cover on in different
before placing it on positions.
the glass bowl.