Operation - Siemens Pointek CLS500 Schnellstartanleitung

Operation

rotary switch
menu selector
RED (+) push-button
increment value
BLUE (-) push-button
decrement value
coaxial connector
(probe connection)
Access data in the transmitter from 29 menu items divided between two menu levels: 00 to 0F
and 10 to 1F. Use the rotary switch and push-buttons in combination to select an item and
adjust the value.
The rotary switch
The rotary switch gives you access first to the menu level and then to the menu item.
C
The push-buttons
The push-buttons allow you to change the value of a menu item. Use the RED (+) button to
adjust a value up; the BLUE (–) button to adjust a value down: acceptance is indicated when
the left-most colon on the LCD appears. Or, press both simultaneously for special applications.
7ML19985XS81
Type:
Ser.:
Date:
Rev.:
earth TAB
tank/vessel frame
measurement connection
The rotary switch has a small slot where the current position can be
read. The positions are read clockwise, and in increasing order: 0, 1, 2, 3,
4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. The position wraps from F to 0.
The switch can be moved in either direction. When it is turned to a new
position, the LCD displays the new menu selection for one second,
followed by the data for that position.
Certain menu selections return more than one piece of information per
item: in that case the display alternates between the two values, for
example, PV Value / Fault status.
Pointek CLS500 – QUICK START MANUAL
LCD
Tampering voids warranty
label
(protective
seal)
solid-state
switch (any
polarity)
current-loop
connection
(any polarity)
Page EN-7