Progress bar
Progress bar for playback. Click on the bar to jump to a specific point in the video.
Mute
Switches off the volume.
Volume
Volume setting for the playback.
Digital zoom
The digital zoom can be activated here. The zoom area can be changed in the video image. The zoom factor
can be changed using the "W" (wide angle) and "T" (tele-zoom) buttons.
Mirror / flip
Mirrors or flips (180° rotation) the video image.
Snapshot
An individual video image can be displayed and saved here.
Full-screen
The full-screen video image is displayed.
6.3 Network
Information
MAC address:
Obtain an IP address automatically (DHCP): The IP address, subnet mask and address for the default
Use the following IP address:
IP address:
Subnet mask:
Default gateway:
Use the following DNS server address:
Primary DNS server:
Secondary DNS server:
HTTP port number:
The hardware address of the camera is displayed here.
gateway are obtained automatically from a DHCP server. An
activated DHCP server must be present in the network in this
case.
Manual setting of the IP address, subnet mask and default gateway.
Manual setting of the IP address for the IP camera.
Manual setting of the subnet mask for the IP camera.
Manual setting of the default gateway for the IP camera.
If the DNS server address is not assigned automatically by
a DHCP server, then it can be entered here manually.
First server address used where the camera attempts to
convert the DNS names into IP addresses.
Alternative server address used where the camera attempts
to convert the DNS names into IP addresses.
The standard port for HTTP transmission is 80. Alternatively, this
port can have a value of 1024-65535. If several IP cameras are
108
English