Mounting Sanding Inger; Connecting/Removing/Emptying; The Dust Collection Box - Parkside PHS 160 E5 Originalbetriebsanleitung

The sanding plate (10) is itted with Velcro
for rapid attachment of the sanding sheet
(12).
The sanding sheets (12) comprise 2 parts
and can be individually replaced depend-
ing on wear.
To achieve optimal sanding results, only
use sanding sheets with the right grain
size.
Attaching sanding sheet:
1. Press both parts of the sanding
sheet (12) evenly onto the sand-
ing plate (10). Please ensure
that the sanding sheets lie lush
and the holes are placed directly
above the extraction openings
(15) of the sanding plate (10).
Removing sanding sheet:
2. Pull the sanding sheet (12) from
the sanding plate (10).
Only perform sanding once both
sanding sheets are mounted.

Mounting sanding inger

You can replace the pre-mounted sanding
plate (10) with the sanding inger (13) pro-
vided in the scope of delivery.
Unmounting sanding plate:
1. Open the clamping lever (16)
and turn it in the direction of the
sanding sheet until it reaches the
stop.
2. Remove the front section of the
sanding plate (10).
Inserting sanding inger:
3. Insert the sanding inger (13)
from above against the back
section of the sanding plate (10)
and push it irmly into place.
4. To lock, turn the clamping lever
(16) into its original position.
Attaching sanding sheet for
sanding inger:
5. Press the sanding plate for the
sanding inger (14) evenly onto
the sanding inger (13).
6. Place a sanding sheet onto the
back section of the sanding plate
(10). This will prevents soiling of
the Velcro.
Connecting/removing/emp-
tying the dust collection box
Connecting the dust collection
box:
1. Before connecting, ensure that
the dust collection box (8) is
irmly closed.
2. Press the release button (4) on the
dust collection box (8). Slide the
dust collection box (8) all the way
onto the connection for dust ex-
traction (9). The two lugs (9a) on
the connection for dust extraction
(9) it into the two grooves (8a) of

the dust collection box (8).

3. Let go of the release button (4).
It will click into place above the
ixing pin of the dust collection
box (8).
GB IE
25