Remote Monitoring Of Transmitter Battery/Accupack Condition - Sennheiser EM 1046 Gebrauchsanleitung

MANIPULATION
Choose the option to indicate the condition of the
transmitter battery (see ch. 4.1.1)
Depress
to select the display mode for the indication of
the battery condition.
NOTA BENE
This function is only operative if SK 50,
SK 250 or SKM 5000 transmitters are used.
Depress
to return to the previous level.
This key also serves to stop data entry in case of
errors.
Publ. 10/94 engl, A 02
REMOTE MONITORING OF
TRANSMITTER BATTERY
FUNCTION
The EM 1046 RX receiver module
distinguishes between two types of power
supply:
If primary cells are used, the display indicates
the remaining capacity in three steps. A 5-step
SET
display is used for rechargeable batteries.
If you connect transmitters other than SK 50,
SK 250 or SKM 5000, the display indicates
CONDITION OF PRIMARY CELLS:
Capacity of 100 %
ESC
Capacity of about 70 %
Capacity of about 30 %, the display starts
blinking.
Attention !
Replace the transmitter batteries. The
remaining capacity only suffices for about
half an hour!
DIVERSITY
MENU
A B
Y
N
SET
ESC
DISPLAY
4.1.8
(RX)
33