Herunterladen Inhalt Inhalt Diese Seite drucken

Receiver Frequencies Function - Sennheiser EM 1046 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

MANIPULATION
Choose option "RX-Freq." (chapter 4.1.1).
Depress
to allow the receiver frequencies to be selected.
The "M" (for MHz) on the display starts
blinking.
24 MHz (7 MHz VHF) maximal
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
24 MHz (7 MHz VHF) maximal
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
24 MHz (7 MHz VHF) maximal
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
Publ. 10/94 engl, A 02
RECEIVER FREQUENCIES
FUNCTION
SET
The EM 1046 RX receiver module can be configured as follows:
The frequencies or frequency ranges selected must fall within the
24 MHz window for the UHF receiver and within the 7 MHz window
for the VHF receiver. The configuration selected is stored in the EM
1046 RX receiver module by a personal computer via the service
interface. The configuration can be changed as often as desired.
Refer changes to the system configuration to your authorized
Sennheiser distributor.
Example 1:
Variable adjustment within one frequency range (in the present case the
total bandwidth of the system).
Example 2:
Variable adjustment within three frequency ranges. The frequencies
between two adjacent frequency ranges cannot be used.
Example 3:
Seven selectable frequencies. The EM 1046 RX receiver modules come
with this standard setting.
DIVERSITY
A
operation on max. 32 switchable frequencies or
variable adjustment of receiver frequencies (5 kHz grid) within 16 frequency ranges
MENU
B
Y
N
SET
ESC
DISPLAY
BEISPIEL
4.1.2
(RX)
21

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis