Ir Remote Control - Cameo ZENIT W300 Bedienungsanleitung
Vorschau ausblenden
Andere Handbücher für ZENIT W300:
- Bedienungsanleitung (96 Seiten) ,
- Bedienungsanleitung (208 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IR REMOTE CONTROL
12
Aim the infrared remote control directly at the infrared sensor on the front of the lamp. The maximum
range is approximately 8 metres. In DMX and Slave modes, the remote control is deactivated. Battery
for IR remote control = CR2025.
Blackout
Auto programme
Color macro
Strobe
Speed
Individual color macros
Brightness
Manual color mix
Fade programmes
-
Color preset
The blackout button is used to switch off all LEDs, regard-
less of operating mode enabled via the remote control.
Press the blackout button again to reactivate the previously
selected mode.
Auto-Programmes 1 - 6. Programme selection with
and
. Programme run speed with
and
. Brightness setting with
Color Macros 1-15. Selection with
Strobe light for AUTO, FADE and MANUAL operating modes.
Press
to activate. Strobe speed with
Press
to deactivate strobe.
Setting the running speed for Auto and Fade programmes.
Individual color macros 1-5. Selection with
Press
and
and
to adjust brightness.
Press
and
,
,
colors. Adjust intensity with
Fade programmes Auto 1 - Auto 5. Programme selection
with
and
. Programme run speed with
and
. Brightness setting with
and
.
Direct selection of color presets 0 to 9.
and
and
and
.
and
.
and
.
and
.
or
to manually mix
and
.
and
and
- Quicklinks:
- Deutsch
- Bedienung
- DMX Mode
- DMX Technik
- DMX Steuerung
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
