Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b) Amplitude : more than 60mV
Note
If these conditions are not satisfied, the following message is displayed below the screen : " Unable to
autosetup "
5.2. Vertical
Following description on switches are applied to both CH1 And CH2 equally.
1) Display. (On/Off)
CH1 or CH2 is selected and displayed by pressing this switch, and both channels can be selected and displayed at
the same time. Whenever this switch is pressed, channel display function is operated repeatedly.
2) Coupling. (AC/DC/Ground)
Three input coupling modes are available. Select the desired coupling mode by the DC/AC/GND switch. The
selected coupling mode is displayed at the bottom left of the screen. Whenever the switch is pressed, coupling of
input signal is operated in the sequence of AC, DC and Ground.
VOLTS/DIV
The vertical axis sensitivity can be set by the VOLTS/DIV switch of
the CH1 and CH2.
Menu
There is a separate vertical menu for each channel. Each item is
set individually for each channel.
-13-
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
