Control Options During Voice Calls - Telecom Behnke 5 Serie Anleitung

▸
Use configuration step code 09 to set the time
interval for relay activation, i.e. the amount of
time (in seconds) the relay will open the door.
▸
Use Configuration step codes 10 and 11
to set the activation codes for the relay. If
you change the default activation code in
configuration step code 10 from 0 to e.g. 55,
the relay will be activated to open the door
by entering 55 followed by the # key on your
telephone with DTMF dialling.

5.4. Control options during voice calls

During voice calls, Behnke Series 5/10 Intercom
stations offer several control options to be
activated using a telephone with DTMF dialling:
Entry
Activation code #
## x
* #
* *
www.behnke-online.com
Function
Activate relay
The relay operations mode, the activation time and the activation
code, naturally, have to be set correctly to activate the relay via an
activation code.
Set volume to x (x=0 to 9)
The volume setting is only valid for the current connection. The
volume can only be permanently set via the configuration steps 06
and 07.
Hang up
Enter set-up mode (subsequently, enter security code)
Instructions for Series 5 / 10
Using the touch panel
GB
57