Operation Instructions; Powering The Camera On/Off; Using The Camera Buttons - Stryker 1188HD Benutzerhandbuch

Operation Instructions

Note Before operating the 1188HD Camera, ensure all components
have been set up according to the instructions in the "Setup and
Interconnection" section of this manual.
Warning Before using the 1188HD Camera in a surgical procedure, test
all components to ensure proper function. Ensure that a video
image appears on all video monitors before beginning any
procedure.

Powering the Camera On/Off

Press the power switch on the console to power the camera on or off.

Using the Camera Buttons

The camera console and camera head both feature a cross-shaped, four-button
keypad for controlling the 1188 camera (see Figure 7). These buttons are labeled
P, W, Up, and Down.
Figure 7: The four-button keypad
P (Picture) Button
The P button controls up to two remote video accessories.
• Press the P button for less than one second to select Remote 1. One
beep will sound.
• Press the P button for more than one second to select Remote 2. Two
beeps will sound.
EN-19