Ecler NPA4000T Bedienungsanleitung Seite 48

DIGITAL
Processing:
A/D & D/A
DSP
Latency
Analog Input headroom:
Digital Input attenuator:
Input Impedance:
Maximum Delay:
Delay resolution:
Compressor / Limiter:
Threshold
Ratio
Attack time
Release time
High & Low pass Crossover filters
Parametric Eq types (8 max. per output)
Built In signal generator
Signal Mute
Signal Polarity Invert
Connectivity:
48
24 bit, 96kHz. S/N:110dB/115dB AKM
32/64 bits
824µs
+18 dBV = +21dBu
Stepless from –∞ to +0dB
Balanced, 22kΩ
1s (343.4m) total for all 2 channels.
10.4µs (3mm)
from -36dBV to +18dBV
1:1 to ∞:1 (limiter)
Auto or from 0.1ms to 500ms.
Auto or from 1ms to 5s.
Butterworth in 6/12/18/24dB/oct.
Bessel in 12/18/24dB/oct
Linkwitz-Riley in 12/24dB/oct.
- Bypass / On-Off all channels
- Param. Eq. 20Hz-20kHz; -60/+12dB; Q from =.3 to 200
- Low & High Shelf 6/12 dB/oct
- Low & High Pass 6/12 dB/oct.
- All-Pass 1/2 order
- Sine (20Hz to 20kHz)
- Polarity(20Hz to 20kHz)
- White
- Pink
Yes
Yes
- Ethernet Base-Tx 10/100Mb Auto X-Over Cat5
- Rs-232
- Fault relay N.O./N.C.
- AES / EBU (In / Out) 8kHz to 96kHz (may be optional on
some units).