Waeco MagicWatch MWE 150 Montage- Und Bedienungsanleitung Seite 34

MWE-150-2.book Seite 34 Freitag, 3. Februar 2006 4:52 16
Installing MagicWatch
6.4 Fastening the control electronics
Note the following information when selecting a place to fit the control elec-
tronics:
Note the length of the sensor cables.
The control electronics may not be damaged if you have luggage or ob-
jects in the boot.
➤ Fasten the control electronics to a suitable place in the boot.
Caution!
The control electronics should not be exposed to any moisture.
Note
The polarity of the socket cannot be reversed: They can be only be
plugged into the connection in one way.
➤ Plug the cable sensor's sockets into the connections on the control elec-
tronics (c B, page 7).
Make sure the locking pin catches.
34
MagicWatch MWE150