Herunterladen Inhalt Inhalt Diese Seite drucken

Hoshizaki FM series Installationsanleitung Seite 2

Mit eingebautem vorratsbehälter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
IMPORTANT
1. In order to carry out safe and proper installation
of the product, please read this booklet
carefully beforehand and follow the instructions
contained within.
2. On completion of the installation, start up the
icemaker to check for any abnormalities, and
instruct the user on how to use and maintain
the icemaker in accordance with the
Instruction Manual.
3. This booklet should be handed over to the user
after the installation and be preserved by the
user together with the Instruction Manual for
any further consultation that may be
necessary.
The installation must be carried out by
qualified personnel, in accordance with current
regulations, according to the manufacturer's
instructions.
1. UNPACKING
Children should not be allowed in reach of the
packaging elements (plastic bags and expanded
polystyrene) as they are potential sources of
danger.
Remove shipping carton, tape(s) and packing. If
packing material is left in the icemaker, it will not
work properly.
Front Panel
(Left)
Power Supply
Cord
WARNING
WARNING
CAUTION
Top Panel
Door
Front Cover
Air Filter
Fig. 1
1) After removing the packaging, make sure that the
icemaker is in good condition. If in doubt, please
do not use the equipment but apply to professionally
qualified personnel.
2) Remove the shipping tape holding the Door and
Front Panel.
3) Open the Door, take out the package containing
accessories, and check the contents:
a) Installation Kit
Inlet Hose
Outlet Hose
Adjustable Leg
b) Scoop
4) Remove the Front Panel (Left) and Top Panel. See
Fig. 2.
5) Remove the protective plastic film from the panels.
If the icemaker is exposed to the sun or to heat,
remove the film after the icemaker cools.
Front Panel
(Left)
Front Panel (Left): Remove the screws. Lift up
and pull toward you.
Top Panel:
Remove the screws and lift up.
Fig. 2
2. LOCATION
IMPORTANT
1. This icemaker is not intended for outdoor use.
Normal operating ambient temperature should
be within 5°C to 40°C. Normal operating water
temperature should be within 5°C to 35°C.
Operation of the icemaker, for extended
periods, outside of these normal temperature
ranges may affect production capacity.
2. The icemaker should not be located next to
ovens, grills or other high heat producing
equipment.
1
ENGLISH
1
1
4
1
Top Panel
Protective
Plastic Film
Adjustable Leg

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis