Connecting The Power Cart - WAGNER FineCoat Power Cart Betriebsanleitung

Connecting the power cart

1. Place the turbine onto the power cart. Push the latch
bracket (1) in to secure the turbine.
2. Plug the turbine into the electrical socket of the power cart
(2).
3. Connect the spring end of the air hose to the turbine (3).
1
6
2
5
GB
4. Connect other end of the air hose to the spray gun (4).
5. Thread the material hose onto the pressure tank outlet and
tighten with a wrench (5).
6. Thread the other end of the material hose to the spray gun
(6).
7. Bundle the hoses together using the straps (7). Start at
the gun and work your way back.
4
7
3
16
8
2