Operating Elements; Start-Up - HSM 450.2 Betriebsanleitung

8.

Operating elements

Membrane keyboard
Ready for operation
green LED
Cut material bag full
red LED
Paper jam – electric motor overloaded
red LED
Front door or funnel flap opened
red LED
ON pushbutton
shredder is switched on – cutting system
runs in feed direction
9.

Start-up

Read operating instructions before start-up.
In emergencies immediately press
the red emergency-stop pushbutton!
Insert plug in power outlet.
Inserting a new bag for cut material
• Open the front door and pull out the cutmaterial container completely.
• Insert an new cut material bag into the container and fold the upper border approx. 10 cm over the upper
frame tubes.
• Push in cut material container completely and close the door.
05/02
Paper shredder
Stop pushbutton
cutting system stops – shredder remains
in standby function
Reversing pushbutton
cutting system runs in reverse direction
Main switch
I
Turning the main switch 90° in clockwise
direction switches the machine on.
0
0
The main switch can be secured in the
OFF postion with a padlock.
Emergency-stop pushbutton
In emergencies immediately press
the red emergency-stop pushbutton!
This switches the paper shredder off.
The cutting system stops.
Emergency-stop is released by pulling out
the pushbutton.
GB
HSM 450.2
17