Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The subject-heading for information may be
located in coloured box.
In Top mode the
quest the next or previous page respectively.
If TOP text transmission is not available, in
case of operation of these commands,
wraparound occurs. For example page 100
appears to be one greater than page 199.
Connect Peripheral
Equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
you where the different (Optional) equipment
should be connected at the rear side of the
TV.
High Definition
Your LCD Television
ing High Definition pictures from devices
such as a High Definition Satellite Receiver
or DVD Player. These devices must be
connected via the HDMI socket (EXT-5) or
Component Socket (EXT-3). These sockets
can accept either 720p or 1080i signals.
Note: For proper connection of a device to
HDMI input of your TV via using a DVI-to-
HDMI cable, use PC Audio In input for sound
connection.
Via The Scart
LCD TV has
2
Scart sockets. If you want to
connect peripherals (e.g. video, decoder,
etc.) which have Scart sockets to the TV, use
SCART 1 or SCART 2.
If an external device is connected via the
Scart sockets, the TV will be switched to AV
mode automatically.
• Do not connect Digital Set Top Box devices
via Scart 1.
Use Scart 2.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a
or
commands will re-
is capable of display-
Scart socket, you should connect it to the
Aerial input of the TV.
If the VCR is connected via Aerial input it
is suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of
programmes. Most of them are free, others
are to be paid for by the viewer. This means
that you will need to subscribe to the broad-
casting organisation whose programmes
you wish to receive. This organisation will
supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to SCART 1.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCART sock-
ets.
Playback NTSC
To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
•
Connect an NTSC VCR player to RCA Jacks
at the side of the TV.
AV
Then, press
source.
Copy Facility
Source selection for VCR recording.
• Select Feature menu.
• Select Ext-2 Out by pressing
• Select a source to copy the picture from that
source.
- 46 -
button
to select appropriate
/
button.
Werbung
Kapitel
Inhaltsverzeichnis
