Other Features; Tv Status; Mute Indicator; Pip And Pap Modes - TechLine TL 27 LC 700 Bedienungsanleitung

In source menu, highlight a source by

pressing / button and switch to that

mode by pressing

Other Features

TV Status

Programme Number, Programme Name,
Sound Indicator and Zoom Mode are dis-
played on the upper right side of the screen
when a new programme is
" PP" button is pressed.

Mute Indicator

It is placed in the upper left side of the
screen when enabled.
To cancel mute, there are two alternatives;
the first one is pressing the
the second one is increasing/decreasing
the volume level.

PIP and PAP modes

Press the button
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
size and 4 positions
bottom left and bottom right)
PIP window. You can use
change the PIP position. Aspect Ratio of the
PIP window is fixed and 4:3.
When PIP Mode is entered, the default active
window is PIP window and the active win-
dow is indicated by a white frame around it.
The active window can be changed by
 
pressing / button. The status info OSD
belongs to active window. The place of the
status OSDs are same for both windows.
Press the button again to exit the PIP
mode.
Press the button to switch to PAP mode.
At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios
of the windows are fixed.
 
/ or "OK"button.
entered,
button and
to switch to PIP mode.
(upper left, upper right,
available for the
button
When you switch to PAP Mode, Main window
in PIP Mode is displayed on the right side of
the screen. The active window can be
changed by pressing
Press the
mode.
Source restrictions of PAP Mode are same
as in PIP Mode.
different channels from the TV tuner at the
same time.
/
TV

Freeze Picture

You can freeze the picture on the screen by
pressing the
outs; only the main picture can be frozen.

Zoom Modes

Zoom mode can be changed by pressing
WIDE
the button. You can change the screen
size according to the picture aspect ratio.
Select the optimum one from the following
ZOOM modes.
Auto:
When a WSS (Wide Screen Signalling) sig-
nal, which shows the aspect ratio of the pic-
ture, is included in the broadcast signal or
the signal from an external device, the TV
automatically changes the ZOOM mode ac-
cording to the WSS signal.
to
• When the AUTO mode does not function cor-
rectly due to poor WSS signal quality or
when you want to change the ZOOM mode,
change to another ZOOM mode manually.
Full:
This uniformly stretches the left and right
sides of a normal picture (4:3 aspect ratio)
to fill the wide TV screen.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect
ratio), use the Full mode to restore the pic-
ture to its original shape.
- 43 -
 
/ button.
button again to exit the PAP
It is not possible to show 2
OK button. At PIP and PAP lay-