Group Setup; Setting Operations Parameters; Standard Home Group; Scan - Motorola MTP810Ex Funktionsbenutzerhandbuch

4.9

Group Setup

This menu item allows you to set the operation parameters, scanning and my groups folder.
4.9.1

Setting Operations Parameters

When and where to use: If you want to define the radio mode and the talkgroup at the radio startup,
and when changing modes TMO → DMO and TMO → Repeater.
Procedure:
1 From the home screen, press the Menu key.
2 Select Group Setup → Operations Parameters.
3 Select Startup. Select one of the following:
• TMO — the radio powers up in TMO mode.
• DMO — the radio powers up in DMO mode.
• Last Selected — the radio powers up in the mode it was in when last powered down.
4 Select Home Group Startup. Select one of the following:
• Last Selected — the radio enters the TMO/DMO talkgroup which was last selected before
power down.
• Home Group — the radio enters the Home Group (TMO or DMO) at power up, depending
on the radio mode entered at power up.
5 Select HGr TMO → DMO/Rep. Select one of the following:
• Last Selected — when changing modes the radio enters the DMO Talkgroup last selected,
i.e. the DMO Talk Group active last time the Radio was in DMO Mode. If Group Mappings
are configured, they will take precedence and the DMO Talkgroup mapped to the current
TMO Talkgroup is used.
• Group Mappings — when changing modes the radio enters the DMO Home Group unless a
Group Mapping is configured. If Group Mappings are configured, they will take precedence
and the DMO Talkgroup mapped to the current TMO Talkgroup is used.
• Home Group — when changing modes the radio enters the DMO Home Group, ignoring
possible group mappings.
6 Select TMO Home Group — configures the TMO Home Group/Home Folder.
7 Select DMO Home Group — configures the DMO Home Group.
4.9.1.1

Standard Home Group

This menu item allows you to configure the standard home group to be used during start up and when
changing modes: TMO → DMO and TMO → Repeater.
4.9.2

Scan

This menu item allows you to activate/deactivate scanning, view the active scan list, and edit the scan
lists. This feature is available only for the TMO Mode. Your radio joins any group call as long as this
group is defined in the scan list and scan is turned on.
Send Feedback
6866588D06–RB (en-US)
Chapter 4: Main Menu
89