LEGRAND DAKER DK Plus 5 kVA Installationsanweisungen Seite 72

Crest factor
Total harmonic
distortion of the
output voltage
Efficiency
Overload capacity
Number of output
phases
Battery charger characteristics
Rated Battery
Voltage
Maximum charge
current
Recharge time
(to 90%)
Communication and management
Screen and signalling
Communications ports
Software
Protections
Mechanical characteristics
Dimensions
W x H x D( mm)
Net weight (kg)
72
3 101 75 3 101 76
< 7% at full non-linear load
up to 94%
106%-120% for 600-30 seconds (linear decrease)
126%-150% for 30-0.16 seconds (linear decrease)
six pushbuttons and five LEDs for real-time control
of the status and the main parameters of the UPS
RS232 and USB (USB not available on 3 101 78)
Connector for network interface
Software for Windows and Linux environments
- displaying all the functioning and diagnostic
- setup of special functions.
Download a copy free of charge from the website
http://www.ups.legrand.com
Electronic circuits against overloads and short-circuit
Emergency Power Off (EPO)
440 x 88 (2U) x 680
25
7 Technical specifications
3 101 77
3:1
< 3% at full linear load
101%-105% continuous
Single phase
240 Vdc
1.86 Adc
4 hours
is available in order to:
data in case of problems;
Backfeed
Overtemperature
440 x 132 (3U) x 680
3 101 78
up to 90%
28