Schwamborn DSM 500 Bedienungsanleitung Seite 7

ENGLISH
Introduct ion
These instru ctions will help you to become familiar
with your ma chine and to operate it correctly. Please
read our instructions before you operate the
machine.
The right to ma ke technical changes is reserved.
Spare parts and service
Repairs must only b e carried out by a trained
technician.
Type plat e
The type a nd the serial nu
may be found on its type plate. This information will
be required for ordering spare parts. Please make a
n ote of them in the space below so that they will
always be available when required!
MODEL:
SERIAL NUMBER :
Unpacking the machine
You should examine the packaging carefully a
s oon as the machine has arrived. If you find any
damage, retain the packaging so that it can, if
nec essary, be examined by the carrier. Contact the
carr ier immediately and report the damage.
Saf ety instructio ns and warnings
Symbols indicate possible hazards. Please read this
info rma on carefully, and take t ti
to protect both persons and property.
Danger!
This symbol is used to indicate an
immediate
injurious or fatal to the use
Warning!
T his symbol is used to warn of a
situation that could be injurious to the
user.
Caution!
This symbol is used to draw attention to
situations in which light injury to the
user or damage to the machine could
occur.
Ear protection!
High operating noise level. Always wear
ear protection.
Cer tain fundamental safety rules must be observed
whe n using an electrical device.
Rea d all the safety instructions and wa
before you operate the machine.
mber of your machine
he appropriate steps
danger that could
r.
rring notes
1. This mach
combination with accessories supplied by the
manufacture for the removal of coatings, wet or
dry grinding of the following surfaces:
•
concrete
•
screed
•
synthetic resin screed
•
asphalt
•
natural stone flooring
2. Use the machine for appropriate operations
only.
3. The machine is not suitable for use:
•
in areas of explosive hazard
•
on inflammable materials
4. This machine may only be used by:
•
persons who have been instructed in its
correct use
s •
persons
authorised to operate the machine.
5. When using the machine, pay attention to other
persons, and in particular to children.
6. The operator must ensure that no unauthorised
persons work with the machine.
7. Always check the operational safety
machine before using it.
8. The operator is obliged to check the machine
after use for externally visible damage or faults.
Modifications that affect safety are to be
reported to our service department.
9. The operator or the owner of the machine must
ensure that the machine is only ever used when
be
it is in technically perfect condition.
10. No safety devices must ever be removed,
modified or deactivated.
11 . The manufacturer's liability will lapse with any
unauthorised modification or change to the
machine.
12. The mains voltage must agree with the voltage
printed on
1 3. Do not start the machine by bypassing electrical
circuits.
14. The mai ns cable must not
•
be damaged by being driven over, crushed,
yanked etc.
•
it is dangerous to drive over it w
machine is in operation.
15. Regularly check the mains cable for damage.
16. Do not use the machine if the mains cable is
not in perfect condi
17. When using or replacing the mains cable or
extension cables, do not use ty
from the manufacturer's original parts.
7
Caution!
To reduce the risk of fire, electric
shock or injury :
ine is only appropriate for use in
Warning!
who have been
Danger!
the type plate.
tion.
specifically
of the
hen the
pes that differ